Borrelly 360 Retaining Rings
Borrelly 360 multi-turn internal and external spiral retaining rings are made by coiling the ring from laminated flat wire with round edges.
Borrelly Spring Washers makes retaining rings from 5 mm to 1000 mm diameter; 1 turn to 7 turns; Austenitic (AISI 301 - AISI 302 - AISI 316), Semi-austenitic (17-7 PH), Inconel, Hastelloy, CuBe2, Duplex, Super Duplex.
BORRELLY 360 Retaining Rings
Available as standard: 2 ranges 360 rings for shaft or bore, meeting the MA4016 and MA4017 standards of the aeronautics industries.
Precision range Borrelly 360
SPIRAL RETAINING RINGS
Borrelly 360 retaining rings for multi-turn bores and shafts are made by coiling a ring from laminated flat wire with round edges.
They are manufactured with a notch; this make is extremely easy to remove from a groove.
BENEFITS
Compared to stamped retaining rings (circlips), the benefits of the Borrelly 360 ring are:
- No tooling costs
- No assembly lugs
- A 360° retaining surface
- Easy to install and remove
INSTALLING / REMOVING A SPIRAL RETAINING RINGS
Manual, semi-automated or automated installation of a Borrelly 360 retaining ring can be carried out using a simple assembly cone.
A standard screwdriver can be used to remove a Borrelly 360 retaining ring from its groove (whereas a special pliers is needed to remove a stamped circlip from a groove.
Applications
Borrelly 360 2-turn external retaining ring for shaft
Borrelly 360 4-turn internal retaining ring for bore
Custom design request
We study your needs to design your custom spring washers.
Custom design request